Downloads References Prefabricated Construction Building with Engineered Wood Products
ply antitermite stumpf image.jpg PLY

SWISS KRONO anti-termite, T + G
Termite-Resistant, High-Quality OSB

Profiled on all four edges for tongue-and-groove joints, this version of SWISS KRONO anti-termite has outstanding technical attributes. Being completely impregnated with a lastingly effective insecticide, the OSB boards are optimally safeguarded from termite damage.

A Harmonised System

On the Services page, you can download a large number of system modules for building new houses and modernising and renovating existing ones with SWISS KRONO products. Click here to go straight to the download section

Proactive Protection Against Termites

To make SWISS KRONO anti-termite T + G suitable for the special conditions of termite-infested regions, pesticides are added to the liquid mixture during production. This results in a dedicated OSB version that is especially well-suited for export to and use in regions where termites are endemic, such as southern France, Australia, Africa and the United States. Termites love to devour wood and wood-based materials – in the United States alone, they cause billions of dollars’ worth of damage to houses every year, more than fire, storms and earthquakes together. The Global Environment Facility (GEF) estimates that termites annually inflict damage to buildings amounting to between 15 and 20 billion U.S. dollars worldwide.

During production of SWISS KRONO anti-termite T + G, the binder is mixed with an insecticide. This proactive approach makes the OSB highly resistant to termite attack. Test results have confirmed this: even after several weeks of contact with termites, SWISS KRONO anti-termite T + G exhibited no measurable signs of termite feeding, while conventional OSB boards were severely damaged.

Applications

  • Termite-resistant OSB with all four edges made for tongue-and-groove joints
  • For export to affected regions
  • Completely insecticide-impregnated for lastingly effective termite resistance




Strand direction

Major axis Minor axis
Nominal board thicknesses [mm] d 6
to
10
>10
to
18
>18
to
25
6
to
10
>10
to
18
>18
to
25
Strength values [N/mm²]
Stresses on board
Bending fm,k 18.0 16.4 14.8 9.0 8.2 7.4
Compression fc,90,k 10.0 10.0
Shear fv,k 1.0 1.0
Plate loading
Bending fm,k 9.9 9.4 9.0 7.2 7.0 6.8
Tensile force ft,k 9.9 9.4 9.0 7.2 7.0 6.8
Compression fc,k 15.9 15.4 14.8 12.9 12.7 12.4
Shear fv,k 6.8 6.8
Stiffness values [N/mm²]
Stresses on board
Bending modules of elasticity Emeana 4930 1980
Shear modulus Gmeana 50 50
Plate loading
Modulus of elasticity Emeana 3800 3000
Shear modulus Gmeana 1080 1080
a The characteristic stiffness values E05 and G05 are calculated as follows:
E05 = 0.85 x Emean and G05 = 0.85 x Emean
General and building physics values
Bulk density acc. to EN 323 m 600 kg/m³
Max. deviations in board thickness ± 0.8 mm (ContiFinish®) | ± 0.3 mm (sanded)
Thermal conductivity acc. to EN 13986 λ 0.13 W/mK
Water vapour permeability value μ 200 (moist) / 300 (dry)
Thickness swelling acc. to EN 317 ≤ 15%
Expansion coefficient for 1% change in wood moisture 0.03%
Waste Code EWC code 03 01 05
Emissions class E1 – 100% formaldehyde-free binders
(< 0.03 ppm)
Utilisation class acc. to EN V 1995-1-1 1 + 2
Reaction to fire performance class acc. to EN 13501-1 D - s2, d0
CE certificate no. 501-12-2494 - GB
Format [mm] Thickness [mm]

12
18
20

Pieces per pallet
2400 x 675 T + G on all 4 edges *

52

Special formats and thicknesses on request, * only from SWISS KRONO SAS (France)

Laying and Boarding



  • For interior or exterior boarding applications, leave expansion joints at least 3 mm wide between boards.
  • When laid closely with butt joints in interior walls, leave room for expansion where the boards adjoin other structures.
  • The storey-high formats are produced with a slightly reduced width (of 1247 mm) to allow for expansion.



Coating and Varnishing



  • SWISS KRONO OSB with a ContiFinish® surface may be coated with a solvent-containing PU (DD) or synthetic-resin varnish.
  • Sanded surfaces may be coated like normal wood (e.g. with varnishes, paints, oils, waxes and glazes).
  • It is advisable to apply at least three coats, sanding after the first one.
  • Application of at least three coats is recommended.
  • The only way to achieve an absolutely smooth surface is to apply filler.



Transport and Handling



  • Take steps to prevent the boards, and especially the unprotected edges, from absorbing large amounts of moisture during transport and installation. Be careful not to damage the edges when lifting, moving and stacking boards (this applies especially to tongue-and- groove boards).
  • Check against the labels or producer’s documentation on-site to make sure that the following are correct: thickness, approved utilisation class, surface (sanded or ContiFinish®) and edge type (square-edged or tongue-and-groove).
  • During installation, boards may be briefly leaned against a solid structure at a 70° angle.
  • Always carry individual boards in an upright (vertical) position.



Storage



  • Protect boards from exposure to significant moisture or very high relative humidity.
  • Prevent direct contact of the boards with the floor. Only store outdoors temporarily, and if unavoidable cover stacks with watertight but water-vapour-permeable tarpaulins.
  • Always stack boards horizontally on pallets and wooden supports (spaced no more than 600 mm apart).
  • Align wooden supports precisely with one another and parallel to the shorter side of the boards.
  • Lay the boards so their edges line up (with a maximum overhang of 15 mm).



Acclimatisation



  • Precondition boards prior to installation.
  • Store boards for about three days under the same climatic conditions that prevail at the installation site.
  • This adjustment to the ambient moisture at the installation site will prevent excessive shrinkage or swelling.



Sawing, Milling, Sanding and Drilling



  • SWISS KRONO OSB can be sanded, sawn, milled and drilled just like solid wood and using all of the same tools.



Nailing, Stapling, Screwing and Gluing



  • SWISS KRONO OSB can be attached to wooden studs and rafters using screws, nails or staples.
  • Use in accordance with the official approvals and standards (Z-9.1-618, Z-9.1-503 and DIN 1052 in Germany as well as EN 1995-1-1 (EC 5)).
  • Additionally bond or glue tongue-and-groove joints.

Downloadable documents

Category:
Art. No. Title
K00596 REACH declaration - English
P00450 SWISS KRONO Delivery programme Flyer - English
P00086 SWISS KRONO OSB Environmental product declaration (EPD) - English
P00241 SWISS KRONO OSB Full-line catalogue Brochure - English
P00595 SWISS KRONO OSB Material Safety Data Sheet - English
P00946 SWISS KRONO Product Tolerances - English
Product documents

There are no downloads available for this product.

­

Cookies facilitate the provision of our services. By using our services, you agree that we use cookies. For more information on privacy, please visit the following link Data protection statement