Downloads References Prefabricated Construction Building with Engineered Wood Products
ply mdf roh image.jpg

Creative Multitalents

An All-Rounder for Interiors

Made mainly from debarked pine and spruce wood, SWISS KRONO MDF excels with consistently high-quality fibre and a light colour. Owing to its fine fibre structure, this classic material is ideally suited for working and shaping.

A Harmonised System

On the Services page, you can download a large number of system modules for building new houses and modernising and renovating existing ones with SWISS KRONO products. Click here to go straight to the download section

SWISS KRONO MDF raw – the User-Friendly Classic

The production of SWISS KRONO MDF (medium-density fibreboard) synthesis of a natural raw material and innovative technology. We produce our versatile SWISS KRONO MDF boards in our plant in Heiligengrabe, Germany. They have a bulk density of about 680 to 810 kg/cu.m and boast high bending strength and strong internal bonds.

The raw material we use to make our MDF boards is high-quality coniferous wood from debarked pine and spruce logs; mainly fresh thinnings from sustainably managed forests are used. First the wood is refined into fibre, then mixed with a binder and finally gently pressed. The result is an engineered wood product with a homogeneous structure both longitudinally and laterally: eco-friendly boards that are easy to work and use and are suitable for a vast range of furniture and interior applications.

SWISS KRONO MDF – raw is available in thicknesses from 12 to 30 mm and complies with the CARB (California Air Resources Board) Phase 2 standard on formaldehyde emissions.

Positive Environmental Footprints

In addition to their multifunctional properties, SWISS KRONO MDF products also actively help to protect the climate. Each cubic metre of SWISS KRONO MDF stores about 1000 kg of CO2 and keeps it bound up until the end of the product’s useful life.

All SWISS KRONO MDF boards are energy-conserving products, because they store more energy than it takes to produce them. In addition, these engineered wood products have been classified as having a negative “Global Warming Potential” (GWP).

Product Advantages

  • Homogeneous structure
  • No knots or cracks, no grain direction
  • Good mechanical strength and workability
  • Smooth, uniform surfaces as a result of pressing and finely distributed fibre
  • Wide range of uses


  • Classic material for furniture and interior uses, also for shops and trade fair stands
  • Ideal for painting, lacquering, coating, veneering, laminating and thermofoiling
  • Excellently suited for drilling, milling etc.
Nominal board thicknesses [mm] >9
Properties Test standard Unit
Max. deviation in board thickness EN 324-1 mm ± 0.2 ± 0.3
Dimensional tolerance (length/width) EN 324-1 mm ± 2.0 mm/m, ± 5.0 max.
Squareness EN 324-1 mm/m ≤ 2.0
Edge straightness EN 324-1 mm/m ≤ 1.5
Thickness swelling after 24-hour soak EN 317 % 15 12 10 8
Internal bond EN 319 N/mm² 0.6 0.55 0.55 0.5
Bending strength EN 310 N/mm² 22 20 18 17
Bending modulus of elasticity EN 310 N/mm² 2500 2200 2100 1900
Surface soundness EN 311 N/mm² ≥ 1
Formaldehyde content 1) EN 120 mg/100g E1
Moisture content 2) EN 322 % 6 ± 2
Surface absorption EN 382-1 mm 150 mm
Sand content ISO 3340 % ≤ 0.05
Reaction to fire performance class EN 13501 Class D-s2, d0
Bulk density EN 323 kg/m³ 680 - 810
Standard grinding K 150
Water vapour permeability value EN 13986 Table 9 Mean bulk density: 600 kg/m³ μ moist 12 | μ dry 20
Mean bulk density: 800 kg/m³ μ moist 20 | μ dry 30
Thermal conductivity EN 13986 Table 11 Mean bulk density: 600 kg/m³ 0.10 W/(m*K)
Mean bulk density: 800 kg/m³ 0.14 W/(m*K)
Sound absorption EN 13986 Table 10 Frequency range: 250-500 Hz 0.10
Frequency range: 1000-2000 Hz 0.20

1) Perforator value acc. to DIN EN 120. Acc. to the annex to Art. 1, Section 3 of the German directive on banned chemicals, in connection with guideline 100 of the Deutsches Institut für Bautechnik, unfinished fibreboard may not exceed a perforator value of 8 mb HCHO/100 g of dry weight at a moisture content of 6.5%. The gliding half-year average may not exceed 7.0 mg HCHO/100 g of dry weight. 2) Upon delivery

Acc. to customer specifications, Acc. to customer specifications, thicknesses from 6 to 38mm are possible

Versatile and Easy to Work

The edges of our MDF boards are smooth and solid and can be shaped or carved without the need for special edging, then painted, lacquered, coated, laminated, veneered or thermofoiled.

General Information on Use of All SWISS KRONO MDF Product

Transport and Handling

  • Protect edges to prevent damage.
  • These products are for interior use and must therefore be protected from moisture and the weather.
  • Do not store outdoors.
  • To prevent rising moisture, stack on top of wooden sleepers.
  • Acclimate boards before by storing them for about three days beforehand uncovered under the climatic conditions prevailing at the installation site.
  • Install only when dry.

Sawing, Milling and Drilling

SWISS KRONO MDF can be sanded, sawn, milled and drilled just like solid wood and using all of the same tools.


  • To prevent splitting, it is advisable to predrill holes before using screws. It is standard practice for the holes to be 80% of the screw shaft diameter.
  • Do not attach screws to the plate surfaces closer than 20 mm from the edge.
  • When attaching screws to the edges, maintain a distance of at least 70 mm from the corners and space them at least 30 mm apart.


  • All commercially available wood glues can be used with SWISS KRONO MDF.
  • Because the surface layer is denser, it is enough to apply between 80 and 120 g of glue per square meter.

Sanding and Smoothing

  • SWISS KRONO MDF comes sanded to a fineness of 150 grit.
  • To meet very high quality requirements, eg for coating and painting, the boards should be sanded before and /or after treatment, depending on the application.

Painting, Coating, Waxing and Lamination

  • Applying a coating or suitable will minimise the risk that exposure to light will alter the colours, provided that appropriate UV blockers are added.
  • Sanded surfaces can be coated just like ordinary wood (with paint, oil, wax etc.).)
  • All commercially available paints, coatings and waxes that are suitable for MDF may be used.
  • Greatly thinned paint or coating, a low solids content and/or insufficient application can detract from the results.
  • Before coating, make sure that the surface is absolutely free of oil, grease, silicone and dust.
  • It is strongly advised to carry out a test before proceeding.
  • Optimal results are achieved by brushing with strokes at right angles to one another.

Documentos para descargar

Producto documentos

No se ha encontrado ningún resultado bajo %1. Seleccione otra sección y / u otro idioma, por favor.

Encuentra las secciones seleccionadas que no se corresponden con la selección de idioma alemán, inglés, francés, ruso, español bajo la selección "Otros".

Seleccionando "Vista general" obtiene una panorámica general rápida sobre todos los idiomas y versiones disponibles en una sección.


Cookie Settings

We use cookies to improve your experience and to provide you with personalized content. By using this website you agree to our cookie policy

Notwendige Cookies
Statistische Cookies
Cookies von Drittanbietern
Accept Change Settings

Cookie Settings

More information on how we use cookies in our cookie policy.


Notwendige Cookies

Ohne diese Cookies können die von Ihnen angeforderten Dienste nicht bereitgestellt werden.

Statistische Cookies

Erlauben Sie anonyme Nutzungsstatistiken, damit wir unser Angebot verbessern können.

Cookies von Drittanbietern

Cookies von Drittanbietern, die eingebunden werden um personalisierte Anzeigen für Sie auszuliefern.

Cookies We use on This Site