Downloads References Prefabricated Construction Building with Engineered Wood Products
ply mdf paneel image.jpg

SWISS KRONO MDF - Panel Quality
Creative Multitalents

Our Specialists for Lamination

Our panelling grade MDF boards let you easily and inexpensively shape and laminate strips, mouldings and panels. They are a fully fledged alternative to solid wood for these applications.

A Harmonised System

On the Services page, you can download a large number of system modules for building new houses and modernising and renovating existing ones with SWISS KRONO products. Click here to go straight to the download section

Lightweight – Easy to Shape

Our panelling grade MDF comes in high-quality, lightweight boards with an optimised bulk density for panel applications. It excels with low weight, long tool lives and easy shaping. This wood-based material is ideally suited for creating laminated, milled products for interior uses.

Product Advantages

  • Optimised bulk density
  • Easy to shape, tools last longer
  • Homogeneous horizontal structure
  • A complete, affordable substitute for solid wood for making strips and mouldings


  • Special MDF for shaped strips, mouldings and panels and for making milled, laminated panels for interior uses
  • Furniture

Nominal board thicknesses [mm] >9
Properties Test standard Unit
Max. deviation in board thickness EN 324-1 mm ± 0.2 ± 0.3
Dimensional tolerance (length/width) EN 324-1 mm ± 2.0 mm/m,
± 5.0 mm. max.
Squareness EN 324-1 mm/m ≤ 2.0
Edge straightness EN 324-1 mm/m ≤ 1.5
Thickness swelling after 24-hour soak EN 317 % 16 14 12 11
Internal bond EN 319 N/mm² 0.45 0.45 0.45 0.40
Bending strength EN 310 N/mm² 20 20 18 17
Bending modulus of elasticity EN 310 N/mm² 1700 1600 1500 1400
content 1)
EN 120 mg/100g E1
Moisture content 2) EN 322 % 6 ± 2
Surface absorption EN 382-1 mm 150 mm
Sand content ISO 3340 % ≤ 0.05
Reaction to fire performance class EN 13501 Class D-s2, d0
Bulk density EN 323 kg/m³ 670 - 700
Standard grinding K 150
Water vapour permeability value EN 13986 Table 9 Mean bulk density: 600 kg/m³ μ moist 12 | μ dry 20
Mean bulk density: 800 kg/m μ moist 20 | μ dry 30
Thermal conductivity EN 13986 Table 11 Mean bulk density: 600 kg/m³ 0.10 W/(m*K)
Mean bulk density: 800 kg/m 0.14 W/(m*K)
Sound absorption EN 13986 Table 10 Frequency range: 250-500 Hz 0.10
Frequency range: 1000-2000 Hz 0.20

1) Perforator value acc. to DIN EN 120. Acc. to the annex to Art. 1, Section 3 of the German directive on banned chemicals, in connection with guideline 100 of the Deutsches Institut für Bautechnik, unfinished fibreboard may not exceed a perforator value of 8 mb HCHO/100 g of dry weight at a moisture content of 6.5%. The gliding half-year average may not exceed 7.0 mg HCHO/100 g of dry weight. 2) Upon delivery

Acc. to customer specification

Easy-to-Use Lightweights

SWISS KRONO MDF – panelling grade boards are easy to work and use. Their homogeneous structure ensures precise milling results. They are easy to veneer, laminate or thermofoil.

General Information on Use of All SWISS KRONO MDF Product

Transport and Handling

  • Protect edges to prevent damage.
  • These products are for interior use and must therefore be protected from moisture and the weather.
  • Do not store outdoors.
  • To prevent rising moisture, stack on top of wooden sleepers.
  • Acclimate boards before by storing them for about three days beforehand uncovered under the climatic conditions prevailing at the installation site.
  • Install only when dry.

Sawing, Milling and Drilling

SWISS KRONO MDF can be sanded, sawn, milled and drilled just like solid wood and using all of the same tools.


  • To prevent splitting, it is advisable to predrill holes before using screws. It is standard practice for the holes to be 80% of the screw shaft diameter.
  • Do not attach screws to the plate surfaces closer than 20 mm from the edge.
  • When attaching screws to the edges, maintain a distance of at least 70 mm from the corners and space them at least 30 mm apart.


  • All commercially available wood glues can be used with SWISS KRONO MDF.
  • Because the surface layer is denser, it is enough to apply between 80 and 120 g of glue per square meter.

Sanding and Smoothing

  • SWISS KRONO MDF comes sanded to a fineness of 150 grit.
  • To meet very high quality requirements, eg for coating and painting, the boards should be sanded before and /or after treatment, depending on the application.

Painting, Coating, Waxing and Lamination

  • Applying a coating or suitable will minimise the risk that exposure to light will alter the colours, provided that appropriate UV blockers are added.
  • Sanded surfaces can be coated just like ordinary wood (with paint, oil, wax etc.).)
  • All commercially available paints, coatings and waxes that are suitable for MDF may be used.
  • Greatly thinned paint or coating, a low solids content and/or insufficient application can detract from the results.
  • Before coating, make sure that the surface is absolutely free of oil, grease, silicone and dust.
  • It is strongly advised to carry out a test before proceeding.
  • Optimal results are achieved by brushing with strokes at right angles to one another.

Documents à télécharger

Documents produits

Aucune rubrique %1n’a été trouvée. Veuillez sélectionner une autre rubrique et/ou une autre langue.

Vous trouverez les rubriques qui ne correspondent pas au choix de langues proposé (allemand, anglais, français, russe, espagnol) dans la catégorie « Autres ».

Pour un aperçu rapide, sélectionnez « Liste complète » pour obtenir un aperçu de toutes les langues et de toutes les versions d’une rubrique.


Cookie Settings

We use cookies to improve your experience and to provide you with personalized content. By using this website you agree to our cookie policy

Notwendige Cookies
Statistische Cookies
Cookies von Drittanbietern
Accept Change Settings

Cookie Settings

More information on how we use cookies in our cookie policy.


Notwendige Cookies

Ohne diese Cookies können die von Ihnen angeforderten Dienste nicht bereitgestellt werden.

Statistische Cookies

Erlauben Sie anonyme Nutzungsstatistiken, damit wir unser Angebot verbessern können.

Cookies von Drittanbietern

Cookies von Drittanbietern, die eingebunden werden um personalisierte Anzeigen für Sie auszuliefern.

Cookies We use on This Site